Beechcraft KingAir 350

[IAHM-COL]

Original

[IAHM-COL]

@Gabriel

You probably missed pushing some files

Code: Select all


Failed to load file: "Aircraft/KingAir-350/Models/registration.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/beacon.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/beacon.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/Rednav.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/flash.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/Greennav.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/flash.xml"
Failed to load file: "Aircraft/KingAir-350/Models/Lights/flash.xml"
Failed to load file: "Aircraft/KingAir-350/Models/light/taxilight.xml"
Failed to load file: "Aircraft/KingAir-350/Models/light/landinglight.xml"


And I am not getting the shine on my copy.

[IAHM-COL]

Also.

Is it

Code: Select all

Models/Lights


or

Code: Select all

Models/light


or

Code: Select all

Models/lights


Keep it one of those options only

[GabrielYV]

@IAHM-COL ok thanks

[jwocky]

a.) FG runs at 120Hz

b.) I think, there is some messup with the tank positions or maybe payloads. So basically, you use as first approximation the same trick as with the gears. Figure in Blender where you want it, set the unit to "m" and use this coordinate.
Thebadguy was probably me who left the measures from the Electra 10 in there and now you have the wheels of the KingAir but the mass points of the Electra. Once you have put all the weight where you want it (including the pilot's ass), you can set CG and pressure point.

[GabrielYV]

@IAHM-COL Ready Fix lights

[bomber]

Thanks jwocky, thought for a minute I was wearing my cloak of invisibility.

I ask about the Hz, because I run at 50Hz and wonder if this is down to issues others have with gear bouncing.

[IAHM-COL]

Thanks jwocky, thought for a minute I was wearing my cloak of invisibility.

sorry Simon. I just did not know 1) who the question was addressed, nor 2) an answer to that question myself.

[Octal450]

I am making my AP have a customization KP in the roll control. That way it should work OK.

[IAHM-COL]

@IAHM-COL Ready Fix lights

Thanks Gabriel.

Now we are talking

Also, I send this additional fix
https://github.com/IAHM-COL/KingAir-350 ... c7ac6c82cb

Replacing Lights for lights where necessary. In operating systems NIX* base (not Windows), Gabriel and gabriel are actually different people ....

Therefore for your lights to work well in all computers consistency in the naming is required.


Looks good now

IH-COL