Creating racetracks using WED or something similar?

[IAHM-COL]

yes. I used a shallow slope because so far is just a test run.
Im experimenting ways of restoring the lake in the center of the airport.

SHM coded the dirt well now, so next build that should be fixed.
I am not surprised you can gain lots of speed on the WEDded race courses

IH-COL

[LesterBoffo]

Here's a graphic with a description of riding the track with average corner speeds and notes about corners and conditions.



I think this is going to be a lot of fun, I'll have to work with the models as I have the.ac track model about 0.25 nm too far West.

I also have made some custom Monterrey Cypress tree transparency .png's for the perimeter.

[bulldogrs]

Nice job guys! I will test drive the track when I have time

[SHM]

Nurburgring or Spa circuit up next

[LesterBoffo]

Nurburgring or Spa circuit up next

How about Bathurst? It would be a real challenge considering the gradient up Mount Panorama.

[bulldogrs]

Test driving the Philip Island racetrack

[LesterBoffo]

Hey you're going the wrong way!

[bulldogrs]

HAHAH I am Captain Slow

[IAHM-COL]

trying some tricks here

This is a real challenge lesbof

We are really pushing some boundaries here...

And driving against the way....

[IAHM-COL]

@SM

I tried several techniques

Tgconstruct does not honor priorities file over airport landclass so No. Not a alternative solution...
Then No matter what I do to the boundary, there is overriding methods that destroy my complex patterns of boundary, so No... Not the solution


But I found a very easy solution applying now... Which yields perfectly


Standby....