OK UPDATE TIME:
http://prntscr.com/exoosj
The new WL/PSAS Control dialog
WING LVL engages the WING LVL system
CWS is active all the time, providing PITCH augmentation, but it's much much improved, and flies alot more natural. You'll never realize it's on until you hear it trimming for you
Activating MAN PITCH mode will disable this system and give manual Elevator back to the pilot, this will illuminate the MASTER CAUTION light, as and Pitch Degree Pitch Rate protection, and stability augmentation is no longer available.(edited)
Now that I've modelled the engine parameters correctly, without stability augmentation, the pitch can be difficult, especially during approach, when winds are acting up.
It's been active for a while, but less noticable.
Now it's full authority, and very smooth.
I've flown many ILS and Visual approaches now, and it still feels very natural
This is the most advanced 707 in the world.
On approach to the default 2017.1.2 airport manual approach, with PSAS on, following the ITAF FD on the HUD
http://prntscr.com/exooua
One trick: Do not chase the FD, smoothly try to follow it, but don't chase it. Due to the nature of PID-Controllers they will expect perfection and drift to nudge you to adjust.
http://prntscr.com/exoova
The next autopilot build will feature the option to go into FLARE mode even if the AP is off -- this will be on the KCs, and will guide your through the flare if that's more your style
I'm very excited about this new technology, and I can't wait to show it off to you very soon!
FAQ:
Q: PSAS is crashing my plane!!!!
A: Open Leveller/Pitch Stab settings from KC-137R menu, push MAN PITCH
Now note your IAS, attitude, altitude, flap setting
Now go DEBUG --> Property Browser
go to it-fbw and tell me the value of pitch-deg
Otherwise, I can't debug and fix the issue
This system is built as a deritive of IT-FBW system which has just revamped, so I can say it works 99% of the time
Kind Regards,
Josh
KC-137R family project
- J Maverick 16
- Posts: 757
- Joined: Sun Nov 08, 2015 3:16 pm
- Location: Northern-Italy
- Contact:
Re: KC-137R family project
Had fun yesterday while testing the EC-137R with Geed over England, bit of formation flying to RAF Mildenhall. Some of the screenies:
Can't wait to do another test...
Cheers, Mav
Can't wait to do another test...
Cheers, Mav
Breakin' the sound barrier every day!
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
- J Maverick 16
- Posts: 757
- Joined: Sun Nov 08, 2015 3:16 pm
- Location: Northern-Italy
- Contact:
Re: KC-137R family project
UPDATED TO-DO LIST IN ORDER OF IMPORTANCE (deadline: FG Festival - November):
Italic means that the following are not going to be done.
COMMON:
1) Continue works on the Block 45 upgrades (Stby-AIs).
2) Update overhead panel. (update EFIS controller, fix RWR in non-KCs) (411, pinto)
3) Work on new splash screens for all versions (todo: RC; update others). JMav
4) Finish efficient TACAN nav system.
5) rework engines 3D (exterior+interior), UV map with textures and animations (fan spin, reverse, nacelle maintenance doors, etc.) (Martien)
6) add top tail light and fix AWACS' (Martien).
7) Rework interior cabins for all models (Martien).
8) Build new AP and AP status panels, cockpit needs update (Martien).
9) Rework completely the EADI (some canvas).
KC-137R /-RT:
1) improve ATA refueling (create a working refueling code) JMav
3) New liveries + update with latest texturing (JMav)
4) Implement ECM with Northrop Grumman Guardian LAIRCM (RT).
EC-137R:
1) improve a lot the AWACS officer area by adding maps, NDs, upgrade/remove current instruments, reworking 3D, etc. (searching volunteers)
2) End livery works. (JMav).
3) Implement ECM.
RC-137R:
1) rework livery texture according to new model + make a new set of liveries (JMav).
2) implement advanced military recon systems. (searching for experts...)
3) Implement ECM.
E-8R:
1) implement ground surveillance systems with targeting and similar. (searching for experts...)
C-137R:
1) Fix/add new textures. JMav
2) brand new livery pack (N-SCOT).
Regards, Mav
Italic means that the following are not going to be done.
COMMON:
1) Continue works on the Block 45 upgrades (Stby-AIs).
2) Update overhead panel. (update EFIS controller, fix RWR in non-KCs) (411, pinto)
3) Work on new splash screens for all versions (todo: RC; update others). JMav
4) Finish efficient TACAN nav system.
5) rework engines 3D (exterior+interior), UV map with textures and animations (fan spin, reverse, nacelle maintenance doors, etc.) (Martien)
6) add top tail light and fix AWACS' (Martien).
7) Rework interior cabins for all models (Martien).
8) Build new AP and AP status panels, cockpit needs update (Martien).
9) Rework completely the EADI (some canvas).
KC-137R /-RT:
1) improve ATA refueling (create a working refueling code) JMav
3) New liveries + update with latest texturing (JMav)
4) Implement ECM with Northrop Grumman Guardian LAIRCM (RT).
EC-137R:
1) improve a lot the AWACS officer area by adding maps, NDs, upgrade/remove current instruments, reworking 3D, etc. (searching volunteers)
2) End livery works. (JMav).
3) Implement ECM.
RC-137R:
1) rework livery texture according to new model + make a new set of liveries (JMav).
2) implement advanced military recon systems. (searching for experts...)
3) Implement ECM.
E-8R:
1) implement ground surveillance systems with targeting and similar. (searching for experts...)
C-137R:
1) Fix/add new textures. JMav
2) brand new livery pack (N-SCOT).
Regards, Mav
Last edited by J Maverick 16 on Thu Aug 03, 2017 11:41 am, edited 3 times in total.
Breakin' the sound barrier every day!
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
- J Maverick 16
- Posts: 757
- Joined: Sun Nov 08, 2015 3:16 pm
- Location: Northern-Italy
- Contact:
Re: KC-137R family project
KC-137R now and then in pics...
OPRF relocation to the Festival of FlightGear - May 2nd, 2016:
OPRF relocation to the Festival of FlightGear - May 2nd, 2017:
Things changed a bit uh?
Cheers, Mav
OPRF relocation to the Festival of FlightGear - May 2nd, 2016:
OPRF relocation to the Festival of FlightGear - May 2nd, 2017:
Things changed a bit uh?
Cheers, Mav
Breakin' the sound barrier every day!
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Re: KC-137R family project
lol
Kind Regards,
Josh
Kind Regards,
Josh
Re: KC-137R family project
good Job J.
https://raw.githubusercontent.com/IAHM-COL/gpg-pubkey/master/pubkey.asc
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
Re: KC-137R family project
Don't you mean J's ?
Kind Regards,
Josh
Kind Regards,
Josh
Re: KC-137R family project
Js/
https://raw.githubusercontent.com/IAHM-COL/gpg-pubkey/master/pubkey.asc
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
Re: KC-137R family project
No, updates have not stopped, we just moved to Slack/Mumble for most development. (Easier than forum)
Kind Regards,
Josh
Kind Regards,
Josh
- J Maverick 16
- Posts: 757
- Joined: Sun Nov 08, 2015 3:16 pm
- Location: Northern-Italy
- Contact:
Re: KC-137R family project
Yep, actually we've been working a bit less on them recently due to Josh spending a lot of time on the A320s and me being rather busy recently both IRL and with other stuff.
But it's proceeding fine, yesterday we've fixed a few bugs and added a digital screen which shows more info regarding the TACAN navigation. Plus, Martien is working on upgrading the engine models, yesterday I've pushed a first part of his work which includes some exterior improvements to the CFM56. Again about engines, we've changed both IAE and CFM variants to less powerful ones due to it's incredible performance (gone a bit unrealistic) recently due to the stabilization system Josh added in full authority giving the plane a better flight experience. This lead us also to improve sound quality which now is closer to RL engines.
Still many things to do but we're good to go .
More to come...
Cheers, Mav
But it's proceeding fine, yesterday we've fixed a few bugs and added a digital screen which shows more info regarding the TACAN navigation. Plus, Martien is working on upgrading the engine models, yesterday I've pushed a first part of his work which includes some exterior improvements to the CFM56. Again about engines, we've changed both IAE and CFM variants to less powerful ones due to it's incredible performance (gone a bit unrealistic) recently due to the stabilization system Josh added in full authority giving the plane a better flight experience. This lead us also to improve sound quality which now is closer to RL engines.
Still many things to do but we're good to go .
More to come...
Cheers, Mav
Breakin' the sound barrier every day!
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Scenery designer, basic livery maker, aircraft developer (current project: F-16).
Using Thrustmaster FCS Flight Pack.
Follow me also on Instagram & Twitter @j_maverick16, Google+ and YouTube.
Return to “Aircraft Development”
Who is online
Users browsing this forum: No registered users and 32 guests