USA TOUR Event | SAT JANUARY 30TH 17:00 - 23:00 UTC

[Martien van der P.]

Maybe I could release my DC-4 Skymaster for the USA tour.

[legoboyvdlp]

Great Don't give it the upgraded engines -- Ernest Gaan nearly lost his life with the upgraded engines.

I managed to load the Basler, but still no running engines.

[IAHM-COL]

Maybe I could release my DC-4 Skymaster for the USA tour.

That'll be awesome
And double cool if you pilot it

IH-COL

[MountainFlyerN22]

Looking forward to see how the Basler BT-67 comes out!
I'll see if perhaps I'll have time to join the trip.

[legoboyvdlp]

MFN22 just sent me a BT-67 model!
https://www.dropbox.com/s/ofxty3gik3hw4 ... d.zip?dl=0

Thanks
Just posting to remind me tomorrow

[legoboyvdlp]

Hello
I just pushed the new model.
But I have a problem.
It refuses to load.
FlightGear crashes at

Code: Select all

flight:3:..\..\..\flightgear\src\FDM\fdm_shell.cxx:170:Scenery loaded, will init FDM
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:378:Starting and initializing JSBsim
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:398:T,p,rho: 518.67, 2116.22, 0.0023769
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:143:Start common FDM init
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:150:...initializing position...
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1041:FGJSBsim::set_Longitude: -1.16959
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1021:FGJSBsim::set_Latitude: 0.185071
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1022: cur alt (ft) =  0
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:162:Checking for lon = -67.0127deg, lat = 10.6038deg, alt = -9999ft
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1054:FGJSBsim::set_Altitude: 205.112
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:179:...initializing ground elevation to 205.012ft...
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:182:...initializing sea-level radius...
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:185: lat = 10.6038 alt = 205.112
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:190:...initializing Euler angles...
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1157:FGJSBsim::set_Euler_Angles: 0, 0.0074002, 1.53833
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:199:...initializing velocities...
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:1071:FGJSBsim::set_V_calibrated_kts: 0
flight:3:..\..\..\flightgear\src\FDM\flight.cxx:235:End common FDM init
general:3:..\..\simgear\simgear\scene\material\matlib.cxx:247:SGMaterialCache::~SGMaterialCache() size=288
flight:3:..\..\..\..\flightgear\src\FDM\JSBSim\JSBSim.cxx:427:Ready to trim, terrain elevation is: 205.015


Can anyone else see this bug?
Other aircraft work fine.
And it's not related to the 3D model.

[legoboyvdlp]

If I can't get the Basler flying by the 30th (12 days), I must be really an emptyhead. But if I can't, I'm taking the DC-6, in the livery of AEROEJECUTIVOS, which I am making immediately, post-haste, and right now.

[IAHM-COL]

HAHA a metallic texture
Those are always hard to give a fine touch.

I tested the Basler. It does not load. I don't know where it fails, but I feel you may have issues with the jsbsim configuration.

[legoboyvdlp]

Yes, I think so.

I guess it will be a grey texture... I am not so good as Gilberto, as you know

[Octal450]

I want to join, but I don't know my porperller planes too well. Can someone say me a nice (large) aircraft to use?