777 trim getting funny on me

Everything in connection with developing aircraft for FlightGear
KL-666
Posts: 1610
Joined: Mon Sep 28, 2015 8:42 am

777 trim getting funny on me

Postby KL-666 » Thu Dec 29, 2016 11:06 pm

Somewhere below 100.000 pounds of fuel the trim goes automatically to too much up on the ground. No matter that i set it less up, it just goes automatically back in it's desired up position again. This is wrong. Trim should stay where i put it. Specifically on the ground.

Kind regards, Vincent

Octal450
Posts: 2184
Joined: Sun Oct 18, 2015 2:47 am

Re: 777 trim getting funny on me

Postby Octal450 » Fri Dec 30, 2016 3:24 am

It's because of the FBW, it doesn't work the way it should in a 777.
You can probably disable the autotrim.

KL-666
Posts: 1610
Joined: Mon Sep 28, 2015 8:42 am

Re: 777 trim getting funny on me

Postby KL-666 » Sat Dec 31, 2016 2:04 pm

I heard people having trouble to reproduce it. Maybe it is not only the fuel weight, but my whole flying routine.

Normally i start with just above 100.000 pounds of fuel. With that i can do about 3-4 flights of some 300 miles length. At each airport i shut down engines and leave the plane for some 15-30 minutes. Then startup again and taxi to the runway. Reaching the runway at the 2nd or 3rd take off i notice that trim has shifted halfway up from where i put it before taxiing. Because it happens always after a few flights, i thought (wrongly) that it may be related to fuel weight.

Kind regards, Vincent

User avatar
jwocky
Site Admin
Posts: 1833
Joined: Sat Sep 12, 2015 12:04 pm
Contact:

Re: 777 trim getting funny on me

Postby jwocky » Sat Dec 31, 2016 2:33 pm

Without having a deeper look, but if the trim changes only while you taxi, this has to be either Nasal or ruleset in the FBW. Can you confirm, the trim behaves normal over the first short flight? That is the Seattle 777-200LR you normally fly? Because I noticed, it has also a ruleset problem with low throttle and switches the engines off.
Free speech can never be achieved by dictatorial measures!

Octal450
Posts: 2184
Joined: Sun Oct 18, 2015 2:47 am

Re: 777 trim getting funny on me

Postby Octal450 » Sat Dec 31, 2016 4:15 pm

I don't understand why Hyde has that FBW, because it doesn't work like the 777 FBW should anyways.

But, I do know that the trim is adjusted by the FBW sometimes, and prehaps Hyde never disables it when the gears touch, so eventually, it moves.

Hyde
Posts: 16
Joined: Sat May 28, 2016 12:30 pm

Re: 777 trim getting funny on me

Postby Hyde » Sun Jan 01, 2017 12:46 pm

I tried with short leg flight from KATL - KNAB - KATL. But could not reproduce.
I will try longer flight.

KL-666
Posts: 1610
Joined: Mon Sep 28, 2015 8:42 am

Re: 777 trim getting funny on me

Postby KL-666 » Sun Jan 01, 2017 3:18 pm

A while ago i did cleanup my installation a bit. Throwing out all sorts of "packs" i had installed over the years: davepack, jpack, and probably some other packs. It was after that, that the problem started to manifest itself. I know this is not proof that it is related, but maybe by reading this, someone suddenly remembers some sort of relation between the 777 and some pack.

@Jwocky
The first flight is never a problem. The second maybe. The third goes pretty surely wrong. Yes, it is the Seattle 777-200LR i normally fly of course :-)

Kind regards, Vincent


Return to “Aircraft Development”

Who is online

Users browsing this forum: No registered users and 85 guests