I added basic MP functionality for this famous aircraft :
- landing and taxi lights
- navigation lights and strobes
- animated engine nozzles with reversers
- animated engine flame and afterburner effect
- contrails and afterburner smoke
- brake smoke and fire, if You unlucky, fire too
As second, I fixed long known gear bug with new custom flight recorder definitions, ofcourse, eye candy has been added.
Concorde should be compatible with old version of FG too, not only with 2017.2.1+
download link - https://github.com/BAWV12/Concorde
ToDo :
Animated nose steering in MP
Concorde MP ready
Re: Concorde MP ready
After many my flights under ATC control i found bad reliability of the heading and radial 2D selectors controled by mouse clicks. But I was able to replace heading / track and vor 2D selectors with 3D knobs with much better control via mouse wheel like another aircrafts (B747, 777 etc.) Knobs are not perfect, but better than default 2D :
Re: Concorde MP ready
NAV1 and NAV2 frequency selectors replaced with 3D knobs operated by mouse wheel too. But I must make some animation for that pieces of the hardware.
Re: Concorde MP ready
Cool
https://raw.githubusercontent.com/IAHM-COL/gpg-pubkey/master/pubkey.asc
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
Re: Concorde MP ready
All AP's key selector knobs :
- NAV1 and NAV2 frequency
- speed
- altitude
- heading / tracking and VOR radial
has been converted to 3D and upgraded for mouse wheel control like other aircrafts. Fly under ATC command is now far better than before with mouse clicking on that instruments.
Download from https://github.com/BAWV12/Concorde/archive/master.zip
- NAV1 and NAV2 frequency
- speed
- altitude
- heading / tracking and VOR radial
has been converted to 3D and upgraded for mouse wheel control like other aircrafts. Fly under ATC command is now far better than before with mouse clicking on that instruments.
Download from https://github.com/BAWV12/Concorde/archive/master.zip
Re: Concorde MP ready
I'm thinking about full 3D conversion of the cockpit. I have downloaded early godarklight's version with 3D instruments, but TCAS is missing. I tried convert this instrument into 3D, but without success. Original 2D TCAS instrument has reference on strange texture stored at Aircraft/Instrument/Texture folder, texture name od_wxradar.rgb. In the aircraft's directory that texture does'nt exist, I found it in FGHome dir. But when I open this texture, there is only white label "DISABLED". And this label I see, when I attach this texture to the 3D model. How can I solve this strange behaviour ?
Re: Concorde MP ready
3D TCAS solved. Base of the solution is canvas and heavily reduced NAV display. All based on genial work of IDG team. Now, there are not any obstacles to make 3D cockpit for this aircraft.
3D cockpit
"Small" progress :
Full 3D cockpit. Autopilot panel needs texturing and lighting, but it will be piece of cake. Ignore please NAV display, it is only for test purpose.
Now, snow and rain is functional :
Full 3D cockpit. Autopilot panel needs texturing and lighting, but it will be piece of cake. Ignore please NAV display, it is only for test purpose.
Now, snow and rain is functional :
Re: Concorde MP ready
Also, keep in mind that yesterday I had to unistall this craft. My FG came to a grinding halt anytime it came too close to your concorde version. This did not happen before.
https://raw.githubusercontent.com/IAHM-COL/gpg-pubkey/master/pubkey.asc
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
R.M.S.
If we gave everybody in the World free software today, but we failed to teach them about the four freedoms, five years from now, would they still have it?
Re: Concorde MP ready
Yes, I know, I'm working on it. I added custom canvas from old artix's version of A3xx and probably, somewhere is big problem. I will try use standard FG build in canvas, or disable it completly and aircraft will be without TCAS.
I temporarily disabled all canvas code on my git repository. If You want fly Concorde, redownload it please. But TCAS is only dummy.
I temporarily disabled all canvas code on my git repository. If You want fly Concorde, redownload it please. But TCAS is only dummy.
Return to “Aircraft Development”
Who is online
Users browsing this forum: No registered users and 40 guests